Author Topic: Fresh Jobs at Halliburton oil and gas  (Read 187 times)

0 Members and 1 Guest are viewing this topic.

Offline admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 1214
    • View Profile
Fresh Jobs at Halliburton oil and gas
« on: September 28, 2015, 08:22:58 AM »
Loading...
Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With more than 70,000 employees, representing 140 nationalities in approximately 80 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir ? from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction and completion, and optimizing production through the life of the field. Visit the company's website at www.halliburton.com.

Electrical/Mechanical LWD Tech II

Job TypeFull Time
QualificationBA/BSc/HND 
Location Rivers
Job FieldEngineering / Technical   Oil and Gas / Energy 
 
Under general supervision, performs maintenance and inspection on Measurements while drilling and/or Logging While Drilling down-hole tool electronics and other equipment used in the application for down-hole tools including Directional and/or LWD sensors. Assembles and disassembles Measure while drilling and/or Logging While Drilling down- hole tools. Identifies tool usage sheet and determines maintenance schedule required, Verify whether preventative maintenance is scheduled on the inserts. Areas of specialization within Product Service Line (PSL) may include: electronics aptitude, computer skills, surface equipment, and down-hole tools. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. Skills are typically acquired through an Associates degree or similar education and 6-12 months experience as a Downhole Mechanical Tech I or equivalent tool technician training or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Basic computer skills are required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement proces. Military training may be substitued for this minimum requirement. Ability to work 24 hour call and respond to call outs within one hour. Ability to accept calls for off loading equipment and complete the appropriate Quality Control documentation including shipping documents. Knowledge of HMS and Tool Operations manual and Global Maintenance Standards for specific sub PSL. Ability to locate, read and understand tool drawing from PSL-specific Tool Manual. Adheres to HSE guidelines, Safety training compliance including Job risk assessments. Must have a valid driver license. Must be able to pass drug and alcohol testing, as well as all other relevant post offer requirements for job. Basic computer skills required.

Electrical/Mechanical Geopilot Technician II

Job TypeFull Time
QualificationBA/BSc/HND 
Location Rivers
Job FieldEngineering / Technical   Oil and Gas / Energy 
 
Under general supervision, performs mechanical/electrical maintenance, test and qualification on down-hole tools, sub assemblies, inserts and other equipment used in the application for Geopilot. Areas of specialization within Product Service Line (PSL) specific shop operations may include: electrical aptitude, mechanical aptitude, computer skills, and down-hole tools. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. Skills are typically acquired through an Associates degree or similar education and 6-12 months experience as a Downhole Mechanical Tech I or equivalent tool technician training or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Basic computer skills are required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process. Military training may be substitued for this minimum requirement. Ability to work 24 hour call and respond to call outs within one hour. Ability to accept calls for off loading equipment and complete the appropriate Quality Control documentation including shipping documents. Knowledge of HMS and Tool Operations manual and Global Maintenance Standards for specific sub PSL. Ability to locate read and understand tool drawing from PSL-specific Tool Manual. Adheres to HSE guidelines, Safety training compliance including Job risk assessments. Must have a valid driver license. Must be able to pass drug and alcohol testing, as well as all other relevant post offer requirements for job. Basic computer skills required.

Principal Technical Professional Surface Solutions

Job TypeFull Time
QualificationBA/BSc/HND 
Experience10 years
Location Rivers
Job FieldEngineering / Technical   Oil and Gas / Energy 
 
Opportunities abound in the wellbore management department of Halliburton's Baroid division. If you are an experienced Senior Technical Professional with a thirst for more administrative responsibilities, consider advancement to the Principal Technical Professional level. The expectations and requirements unique to the job are yours to communicate to field personnel, for whom you will have both remote and direct supervisory responsibilities. Educate personnel on the specifics of operations and of any potential related risks. Work closely with the appropriate Sales Representatives to keep them up to speed on the project. Ensure all necessary equipment is available and fully operational. Visit the rig site as required for preparation of work, to conduct training, and to provide on-location guidance to Field Service Representatives and Service Supervisors. Ensure that a post-well audit is delivered to the client in a timely manner - and prepare for rewarding possibilities.

A bachelor's degree is preferred for this position. Requirements include a minimum of two years experience in the Senior Technical Professional role, including management experience.

Requirements for this role include experience with Thermal Processing systems and Plant management in Onshore operations. 10 years of experience within Sub Saharan Africa operations, specifically the West Coast. Ideal candidates will also be well versed in SCE & DWM operations management. Someone with business development experience or exposure is strongly preferred.

Method of Application

Use links below to apply

Electrical\Mechanical LWD Tech II
Electrical\Mechanical Geopilot Technician II
Principal Technical Professional Surface Solutions



 

Latest Jobs at Dangote Sugar Refinery - Savannah Sugar Company Limited

Started by legendguru

Replies: 0
Views: 359
Last post July 20, 2016, 01:28:06 AM
by legendguru
Fresh Graduate Exec Secretary vacancies In A Leading Nigerian Bank"50 positions"

Started by internet police

Replies: 0
Views: 668
Last post August 16, 2014, 02:58:36 PM
by internet police
Latest Jobs at British Council Ielts Examiners and venue staffs

Started by admin

Replies: 0
Views: 1042
Last post August 31, 2014, 12:52:32 PM
by admin
Jobs Opening at The Clinton Health Access Initiative (CHAI)- Various positions

Started by mastercode

Replies: 0
Views: 365
Last post January 12, 2015, 11:49:01 AM
by mastercode
President Jonathan gives ₦5 Million, Jobs to families Whp lost love ones at NIS

Started by mastercode

Replies: 0
Views: 640
Last post March 14, 2015, 08:32:28 PM
by mastercode
Latest Jobs at Lagos State University Teaching Hospital - LASUTH

Started by newspostng

Replies: 0
Views: 186
Last post May 25, 2016, 01:08:28 AM
by newspostng
Ongoing Graduate Management Trainee Program jobs at Terragon Group

Started by newspostng

Replies: 0
Views: 476
Last post January 18, 2017, 08:50:20 AM
by newspostng
NYSC Graduate Intern Jobs Vacancies at General Electric - GE Nigeria

Started by legendguru

Replies: 0
Views: 338
Last post August 07, 2017, 01:40:34 AM
by legendguru
Massive Nationwide (Entry Level & Experienced) Jobs at Cummins Inc.

Started by admin

Replies: 0
Views: 571
Last post September 06, 2014, 04:33:40 PM
by admin
ExxonMobil 2015 Global Geoscience Student jobs Placement

Started by internet police

Replies: 0
Views: 617
Last post September 16, 2014, 10:00:05 AM
by internet police